Reflex Light Actuator Kit for Baja Designs S8 Light Bars
Couldn't load pickup availability
Reflex Light Actuator Kit – S8 Light Bar – Universal
Baja-tested. Race-ready. Trail-approved.
The Reflex Light Actuator Kit™ (Patent Pending) for S8 Light Bars is Baja Designs’ most advanced solution for dynamic beam control. Whether you’re crawling up a tight trail or blasting through open desert, the Reflex system allows you to adjust the pitch of your light bar in real time—up to 20 degrees of movement—with a switch or controller.
This plug-and-play system mounts directly to your existing S8 light bar universal brackets, so there’s no need for custom fabrication or complicated wiring. You’ll get factory-style installation with high-performance adjustability. Ideal for off-road racers, overland explorers, and weekend warriors alike.
⚠️ Note: Wiring harness required and sold separately. Control via rocker switch, SwitchPros, sPOD, or other compatible power distribution modules.
✅ Key Features:
- 🎛️ On-the-Fly Light Control: Adjust light pitch angle instantly during operation
- 🔩 Bolt-On Install: No cutting or fabrication required – mounts to factory Baja Designs brackets
- 🌐 Universal Fit: Compatible with most vehicle-specific kits using the S8 bracket
- 🌊 Durable + Sealed: Built to MIL-STD-810G and IP54 waterproofing for harsh conditions
- 🛡️ Backed by Warranty: Covered by the Baja Designs Limited Lifetime Warranty
📐 Specifications:
- Voltage Draw: 0.14A / 2.0W @ 13.8V per actuator
- Waterproof Rating: IP54
- Environmental: MIL-STD-810G, IEC compliant
- Material: Low-profile actuator with weatherproof connectors
🔌 Fitment and Compatibility:
- ✔️ 10” S8 Light Bars: Requires 1 actuator
- ✔️ 20”+ S8 Light Bars: Requires 2 actuators
- ✅ Mounts directly to Baja Designs universal S8 light bar brackets
- ❗ Wiring harness not included
🔩 What’s Included:
- (1) Reflex Light Actuator
- Mounting Hardware for S8 Series Brackets
- Installation Guide
🧰 Applications:
- Baja Designs S8 Light Bars
- Compatible with rocker switches, SwitchPros, sPOD, and other PDMs
- Ideal for UTVs, off-road trucks, overlanders, and race builds
Please note that some shipping delays may occur with this product. Please don't hesitate to contact us for the exact shipping timelines.
⚠️ California Proposition 65
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Features
Features
- Twelve built-in holes perfect for tie straps for use in sand, snow, or dirt
- Grooved bottom to slide easily though different terrain types
- Curved ends to glide easily through terrain
- Universal adapting bowl to fit most UTVs
- Ultimately, we want the product to be the strongest and most durable in conditions such as sand, dirt or snow. Therefore, we have spent a lot of time researching and developing the Safe Sled. We used HDPE plastic, which is found to be the most durable material for off-road purposes, to stand against the pressure and load.
Safe Sled to pull your UTV out of any situation
Specification
Specification
- 93.2L*38.1W*18H per unit
- 5mm wall thickness , unit weight is approximately 7.5lbs (3.5-4kg)
