3.5" Lift Spindles
Couldn't load pickup availability
Description
The Dirt King fabricated lift spindles raise the front end a true 3.5" without compromising the ride quality. These spindles are currently the only lift spindles available for the F-150’s that accept both factory or aftermarket upper and lower control arms. The spindles are the CAD designed and constructed from 1/4" thick steel plate. Included with the spindles is all necessary mounting hardware and detailed installation instructions.
Specifications
- Amount of Lift: 3.5”
- Track Width: 1.75" wider per side
- Maximum Tire Size: 35”
- Maximum Backspacing: 5.25”
- Minimum Rim Size: 17”
Track Width
The Dirt King lift spindles increase the track width 1.75” per side. Due to the increased width wider fiberglass fenders may need to be installed.
Tire Info
If installing 35” tires modifications to the wheel wells and bumper may need to be made for proper tire clearance.
What's Included
- Fabricated lift spindles
- Extended DOT approved brake lines
- Brake line mounting brackets
- Grade 10.9 caliper mounting bolts
- Upper control arm washers
- Installation instructions
Features
- Direct bolt on application
- CAD designed
- Professionally MIG welded
- Proudly made in the USA
Instructions
Installation
The installation of this product requires the use of factory hub snouts. They will need to be pressed out of the factory spindles and pressed into the new Dirt King lift spindles.
Compatibility
2004-2008 Ford F-150 2WD
Features
Features
- Twelve built-in holes perfect for tie straps for use in sand, snow, or dirt
- Grooved bottom to slide easily though different terrain types
- Curved ends to glide easily through terrain
- Universal adapting bowl to fit most UTVs
- Ultimately, we want the product to be the strongest and most durable in conditions such as sand, dirt or snow. Therefore, we have spent a lot of time researching and developing the Safe Sled. We used HDPE plastic, which is found to be the most durable material for off-road purposes, to stand against the pressure and load.
Safe Sled to pull your UTV out of any situation
Specification
Specification
- 93.2L*38.1W*18H per unit
- 5mm wall thickness , unit weight is approximately 7.5lbs (3.5-4kg)
